Why Armac Tig Plus ?
Experience true weld control & precision with
TIG (tungsten inert gas) welding. The TIG process
lets you weld thinner material than others processes.
If you want to solve problems related to burn through
or warping when sticks or wire welding, tig might
be the solutions.
This welding process uses a non-consumable tungsten
electrode and a shielding Gas which protects the
welding area from contamination. The concentrated
heat and precise control of the TIG arc allows thin
material (.010 in) to be welded.
Advantages:
Welds steel, aluminum and other metals with
just a single gas, argon.
Precise welding on thin materials is easily
accomplished plus there is less distortion overall.
Tig/Argon
Welding Machines
Features:-
A better & Quicker job with les spatter.
Good arc stricking properties with higher
efficiency.
Simple operation.
No breakdown.
Minimum Maintenance.
High efficiency.
Power saving.
Low running cost.
Optional Gtaw (TIG)
Accessories
Gas & Water cooled TIG torches.
Water Cooling System
Gas flow meter and pressure regulator.
Remote current control with 10, 25, 50, 100
mtrs Control Copper Cable.
TIGNITER HIGH FREQUENCY unit with foot / hand
switch.
TECHNICAL DATA COVERING
IS-4559-1993
CAPACITY OF RECTIFIER MAX.
AXT-300
AXT-400
AXT-500
AXT-600
INPUT
Supply voltage 3 PH
380/415/440
380/415/440
380/415/440
380/415/440
Primary Current at Max. Output
30A
40A
50A
60A
OUTPUT
D.C.
D.C.
D.C.
D.C.
Open circuit Voltage
85
90
90
90
Max. Continuous Current at 100% Duty Cycle
225
300
340
420
Max. Continuous at
60% Duty Cycle
300
400
500
600
KVA-Max. Continuous
15
20
25
30
KVA- Max.
20
26
33
43.2
Welding Current range
(in Two Ranges)
10-300A
10-400A
10-500A
10-600A
GENERAL
Max. Ambient Temp. to
which Rating Apply
40 C
40 C
40 C
40 C
Class of Cooling
H
H
H
H
Type of Cooling
Forced Air Cooled
Forced Air Cooled
Forced Air Cooled
Forced Air Cooled
Approx. Dimensions
(LxWxH) mm
750 x 560 x 710
750 x 580 x 760
950 x 610 x 760
1060 x 710 x 890
Approx. Weight Kg.
240
260
300
360
Note: In view of
continuous development, we reserve the right to modify the design
and dimensions without notice. Duty cycles are applicable for
5 minutes at 40 °C.
