Manual cutting blow pipe is a well
balanced band type capable of cutting mild steel
upto a thickness of 300 mm. It can be used either
with dissolved Acetylene or with low pressure generated
Acetylene with a suitable nozzle. It can be used
with L.P.G. gas also. Its body is forged with brass,
ensuring total safety. Backfire are almost completely
eliminated with a specially designed injector. The
joints are silver soldered. Supplied with 3/64"
nozzle for cutting upto 50mm M.S. and 1/16"
for cutting upto 100mm M.S.
Low Pressure Blow Pipe
Manual welding blow pipe L.P./L.D.
is a low pressure light duty Welding Blow Pipe.
It is designed for use on all lightguage sheet metal
in garages and workshops. It is an injector type
blow pipe which can be used either with dissolved
acetylene or with low pressure generated acetylene.
Provided with three detachable swaged copper tips
of sizes 1,3,7 for M.S. Welding from 1.0mm to 4.00mm
thickness.
Suitable for Shop floor or Outdoor. Cutting -
Heating - Brazing
High Pressure Blow Pipe
Manual welding blow pipe H.P./H.D.
is a high pressure heavy duty Welding Blow Pipe.
It is nicely balanced. The smooth gas controls gives
sensitive flame adjustment with positive leakproof
cut off. With a specially designed mixer, backfire
are almost completely eliminated. Provided with
six detachable swaged copper tips of sizes 2,3,7,13,25
& 30 for M.S. Welding from 1.25mm to 12mm thickness.
Suitable for Shop floor or Outdoor. Cutting -
Heating - Brazing
